神马第九达达兔在线观看,真人抽搐一进一出gif

Tengzhou Highland Machine Tool Manufacturer Tengzhou Highland Machine Tool Radial Drilling Machine Tengzhou Highland Machine Tool
product
You are here: Home - Industry NewsThe advantages of small air hammer
Industry Information

Advantages of small air hammer

release time:
2019/12/3 10:07:39
number of times read:
448

Advantages of small air hammer
The characteristic of the air hammer is to tighten the air as the power to meet the requirements of safe production. The knocking force and the oscillation frequency can be controlled by adjusting the air pressure. After adjusting the oscillation frequency, it can occur. According to different physical properties, different frequencies occur. The air hammer in the early stage was used to break the rock. The broken granite was a broken frequency, and the same broken marble was a frequency. Later it evolved into Forging things are used exclusively for iron, perhaps other workpieces. Adjust different frequencies and impact strengths according to the size of the iron pieces.

(1) Low noise, reasonable structure and convenient operation. This model is suitable for various free forgings, such as extension, upsetting, punching, shearing, forging, welding, twisting, bending, etc., and a variety of open die forgings can be performed by using a cushion die.

(2) The transmission part is a two-stage transmission, which is set in a closed box. During operation, the lubricating oil in the box is thrown by high-speed rotating gears into bearings at both ends of the drive shaft and crankshaft to achieve lubrication of the bearings.

(3) The air hammer has its own air compression mechanism.

(4) The air hammer is equipped with a self-priming lubricating oil pump, which can realize automatic lubrication of the working cylinder and compression cylinder during work.

(5) The electrical part is provided with phase loss protection, short circuit protection, and overvoltage protection to ensure the normal operation of the equipment.

(6) Process performance: Various forging work can be performed by free forging methods using flat or shaped anvils, such as upsetting, extending, punching, shearing, forging, bending and twisting. Tire mold forging, the working efficiency can reach 90%, and it can meet the production of 3 shifts.

(7) It is convenient to operate a. During the working process, various operating actions can be obtained by operating the operating handle, such as idling, lifting, continuous striking, single striking and pressing hammer. The amount of striking energy can be controlled by the operating handle.

(8) Large energy, fast action, good economy, simple structure and convenient maintenance. · The air hammer is equipped with a lifting hammer safety device, which can be opened for various operation actions, preventing misoperation accidents.

(9) A shaking plate safety device is provided at the lead of the hammer rod. This device shakes the hammer rod when replacing the lower anvil block or the lower mold to prevent injuries caused by the falling of the hammer rod.

(10) Light hitting and heavy hitting are clear, and they do not interfere with each other, which can meet the requirements of various forging processes.

In summary, the advantages of the small air hammer introduced above, and based on our business philosophy of "providing customers with the most satisfactory products and services", our company solemnly promises: while ensuring the advancedness, reliability and stability of the equipment, To continuously improve the quality of services, from on-sale to after-sale delivery, commissioning, equipment maintenance management, technical services, user technical training and other aspects, to ensure that customers can get good service, customer satisfaction, rest assured.