Tengzhou Gaodi Machine Tool Co., Ltd.
The vertical drilling machine has a reasonable rotation speed setting, and has good cutting performance when drilling larger holes.
The vertical drilling machine can be automatically fed, and its power and mechanism strength allow higher cutting usage. Therefore, using this drilling machine can achieve higher labor productivity and higher processing accuracy.
The vertical spindle's spindle speed and feed amount have a large range of fluctuation, which can adapt to the processing of different material tools on different material workpieces. And can adapt to the needs of drilling, countersunk, reaming, tapping and other different processes.
The vertical drilling machine is equipped with a set of multi-axis drive heads, which can drill dozens of holes at a time, and can be used as a special-purpose machine tool for mass production.
The vertical drilling machine variable speed switch is provided with reverse rotation in high and low speed gears, so that the thread can be tapped at any speed.
The vertical drilling machine bracket and the worktable clamping handle are set below, and the rest of the operation handles are set above the headstock.
The spindle part of the vertical drilling machine is provided with a return spring and a knife unloading device.
This machine tool has high efficiency, good rigidity, high precision, low noise and wide speed range. If the worktable is a cross worktable, the worktable can be fed manually in vertical and horizontal directions.
The vertical drilling machine is centralized in operation, novel in appearance, easy to use and maintain, and is suitable for workshops with small batches such as repair tools. If equipped with a drilling fixture, it is also suitable for batch-production workshops.
The vertical drilling machine's main shaft box and bracket can be used for both vertical lifting and 360 ° rotary motion. The lifting mechanism is set as a universal component. Its lifting is realized by the worm gear pair through gears and racks, which saves labor and self-locking safety.
The vertical drilling machine motor is installed in the main shaft box. The outer diameter of the motor stator is provided with a bushing for easy maintenance and disassembly. The power is transmitted to the gearbox through a spline sleeve. The main castings are manually aged. The main steel parts such as Spindle sleeves, couplings, transmission shafts, transmission gears, etc. have undergone the necessary heat treatment to maintain good stability and wear resistance.